Flyer oil lamp

Kettlebell Oil Lamp – The Original
Danish:
This kettlebell oil lamp is made of cast iron and stainless steel. It is made from up to 50% recycled materials. The lamp contains a wick that sucks lamp oil from the ball itself up through the handle. The lamp is developed and manufactured by Fe Støberiet A/S.
Instructions for use: Lamp oil is filled by unscrewing the burner head itself and using the funnel provided. The lamp can contain approx. 4 liters of lamp oil. The lamp should be left with lamp oil for 24 hours before lighting so that the wick has absorbed the lamp oil.
The wick should not extend above the burner head. The flame size and burning time depend on how far the wick is pulled up, the amount of lamp oil in the lamp, temperature and weather conditions.
Place the lamp on a stable, heat-resistant surface and keep a good distance from flammable objects. Do not use the lamp indoors. Apply the cap when the lamp is not in use to protect the wick. The cap can also be used to turn off the lamp.
Please note that the handle will become hot when the lamp is on. Only refill the lamp with lamp oil when it has cooled down.
If it becomes necessary to insert a new wick, the base of the lamp can be unscrewed with the included tool. Please note that the lamp may leak at the base. The oil lamp is secured according to Danish standard EN 14059 and is patented Pat. pend.
Warning: The lamp should be kept out of the reach of children. For small children, even a little lamp oil or a suction on the wick can cause life-threatening injuries. Only leave the lamp burning under supervision.
www.kettlebelloilamp-theoriginal.com
Kettlebell Oil Lamp – The Original

Inglese:
This kettlebell oil lamp is made from cast iron and stainless steel. It is made from up to 50% recycled materials. The lamp as a wick which absorbs lamp oil from the kettlebell itself and leads it up through the handle. The lamp was developed and is manufactured by Fe Støberiet A/S.
Instructions for use: Refill lamp oil by screwing off the burner head and using the funnel supplied. The lamp holds approximately 4 liters of lamp oil. Leave the lamp with the lamp oil in it for 24 hours before lighting it to allow the wick to absorb the lamp oil.
The wick should not extend beyond the burner head. The size of the flame and the burn time depend on how far the wick extends, the volume of lamp oil in the lamp, temperature and weather conditions.
Place the lamp on a stable, heat-resistant surface and ensure that it is at a safe distance from combustible objects. Do not use the lamp indoors. Protect the wick by using the cover when the lamp is not lit. The cover can also be used for putting out the lamp.
Note that the handle becomes warm when the lamp is lit. Only refill the lamp with lamp oil once it has cooled off.
If it becomes necessary to insert a new wick, use the tool supplied to remove the bottom of the lamp. Note that the bottom of the lamp can develop a leak. The oil lamp meets the safety requirements set out in Danish Standard EN 14059 and is patented Pat. pen
Warning: Keep the lamp away from children. A small amount of lamp oil or sucking on the wick can cause potentially fatal injuries to young children. Only leave the lamp lit when it is supervised.
www.kettlebelloilamp-theoriginal.com
Kettlebell Oil Lamp – The Original

German:
This kettlebell oil lamp is made of cast iron and stainless steel and 50% recycled material. The lamp is equipped with a wick that sucks the lamp oil from the ball through the handle. Die Lampe wurde von Fe Støberiet A/S developed and produced.
Bedienungsanleitung: Zum Einfüllen des Lampenöls Brennerkopf abschrauben und den mitgelieferten Trichter nutzen. The lamp can be filled with about 4 l of lamp oil. The lamp should have been filled with lamp oil 24 hours before the first ignition, as it must first be sucked out. Der Docht sollte nicht über den Brennerkopf hinausragen. Flame size and burning time are dependent on how far the wick is pulled out, the amount of lamp oil in the lamp, and the temperature and weather conditions.
Place the lamp on a stable heat-resistant surface and in sufficient distance from the flammable objects. Lamp nicht im Innenbereich verwenden. Put the cover on the lamp when the lamp is not in use, so that the wick is protected. The lid can also be used to extinguish the flame. Please note that the handle can get hot when the lamp is burning. Refill the lamp oil only when the lamp has cooled down.
If a new wick must be used, the bottom of the lamp can be unscrewed using the supplied tools. Please note that the bottom of the lamp can be unsealed. The oil lamp corresponds to the Danish Norm EN 14059 and is patented (patent pending).
Warnung: Lamp außer Reichweite von Kindern austellen. For small children, even a very small amount of lamp oil or a lollipop on the wick can cause serious injury. Lamp nur unter Aufsicht brennen lassen.
www.kettlebelloilamp-theoriginal.com